Key Takeaways
- Ferracut laser cuts mild steel from thin sheet up to 20 mm plate.
- Grades include 250HR, 350HR, HA250 and checker plate 250HR.
- Upload a DXF or DWG for an instant quote in AUD.
- Orders are dispatched within 5 business days, with pick-up from Dandenong or shipping Australia-wide.
Mild steel is the workhorse of Australian fabrication. It's cheap, it welds easily and it cuts cleanly. Ferracut laser cuts mild steel from thin sheet up to 20 mm plate. Upload a DXF or DWG, get an instant price in AUD, and we'll dispatch your parts within 5 business days. Pick up from Dandenong or have them shipped anywhere in Australia.
Which mild steel grade should I pick?
| Grade | What it is | Pick it for |
|---|---|---|
| 250HR | Hot-rolled, AS/NZS 3678 Grade 250. The most common grade. | Brackets, frames, guards, enclosures, one-offs. The default choice. |
| 350HR | Hot-rolled, Grade 350, 350 MPa minimum yield | Load-bearing parts, trailers, chassis, machine bases. Lets you go thinner for the same strength. |
| HA250 | Structural hot-rolled with mill scale | Structural frames and supports, parts you'll powder coat or paint |
| Checker plate 250HR | Raised tread pattern on one face | Trailer floors, ramps, ute tray floors, toolbox lids, steps |
Not sure? Start with 250HR. Only go to 350 if the part carries load and you want to save weight or thickness.
Need it rust-resistant without paint? Look at galvanised steel or stainless.
How thick can you cut mild steel?
Up to 20 mm. Common thicknesses run from 1 mm sheet through 3, 6 and 10 mm to heavy plate. See the sheet metal gauge and thickness chart if you're working from gauge sizes, and steel thickness limits for what changes as plate gets thicker.
How accurate is it?
Our material pages list ±0.1 mm on mild steel up to 6 mm and ±0.2 mm on thicker plate. For the details see laser cutting tolerances explained.
Design tips for mild steel parts
- Make holes at least as big as the plate is thick. A 6 mm hole in 6 mm plate is the practical minimum.
- Keep features apart. Thin webs between holes can distort from heat, especially in thin sheet.
- Draw at 1:1 in millimetres with closed outlines.
- Clean up the file. Delete duplicate lines, dimensions and hatching. Our DXF/DWG prep guide walks through it.
- Folding? Keep holes and cut-outs clear of the bend line. We can fold cut parts, so add folding when you quote.
What people make from it
Base plates, gussets and cleats. Brackets and mounts. Machine guards. Trailer and ute tray parts. Signage backing plates. Workshop jigs and fixtures. Prototypes and short runs, with no tooling cost.
How to order
- Upload your DXF or DWG on the instant quote page.
- See the material pages for available grades and thicknesses.
- Add folding if you need it, then check out.
- We cut and dispatch within 5 business days, or you collect from Dandenong.
Generate a quote in seconds
Drop your DWG or DXF into our quoting system, choose your material, thickness and quantity and receive an instant quote.
that simple.
Australian Based & Cut
Our team of experienced fabricators will cut your part, dispatched within 5 business days. If you have any questions please feel free to contact our team at anytime of the process.
Delivered to your door
Our team will pack and ship your order to your door. Or if you prefer, pick up from our Dandenong workshop.
Frequently asked questions
What's the thickest mild steel you cut?
20 mm.
Is 250 or 350 better?
250 is cheaper and suits most parts. 350 is stronger, so it's worth it for load-bearing parts or when you want thinner plate.
Do you cut Corten?
No. We also don't cut brass, copper or tube.
Do you deliver?
Yes, Australia-wide. Or pick up from Dandenong, VIC.
How fast?
Dispatched within 5 business days.
.avif)

































